Products
Manufacturer
Hot-Tappable Insertion Magmeter, SeaMetrics, #EX115/215
$1,448.56 call to order
Manufacturer:
- SeaMetrics (more...)
Manufacturer Links:
File Downloads:
- EX100 200 Manual.pdf (1.1 MB)
- EX 100 200 specs.pdf (652.66 KB)
- Flowmeter Installation.pdf (69.95 KB)
- EX Series Reducing Interference.pdf (97.42 KB)
- Hottap insertion and removal.pdf (108.87 KB)
Water Treatment Canada
Insertion Meter
- Hot-Tappable Insertion Magmeter
- Isolation valve allows installation and removal under pressure
- Useful in large water utility pipe and other applications where shutdown is not an option
- EX115 fits pipe from 3" to 10"
- EX215 fits pipe from 10" to 48"
- Meter extends only about 1/8 of pipe diameter, minimizing potential for clogging with debris
- In most applications, installation tool not necessary due to small tube diameter
- Available in brass or 316 stainless steel
- Standard valve material is brass, with stainless optional
The complete lack of moving parts of the EX100/200-Series insertion flow sensor is the source of its reliability. Brass and stainless steel models withstand a variety of temperature, pressure, and chemical conditions. The EX-Series has no rotor to stop turning in dirty water and there are no bearings to wear out. Like all magmeters, when used in chemical injection applications, these meters should be installed upstream of the chemical line (or far enough downstream to allow complete mixing of fluids before the meter).
A rapidly reversing magnetic field is produced in the lower housing. As the fluid moves through this field, a voltage is generated that is measured and translated into a frequency signal proportional to flow rate. This square wave signal can be sent directly to a PLC or other control or can be converted using any of the SeaMetrics family of indicators and converters.
A modular system of electronics can be attached directly to the flow sensor or remotely mounted. The SeaMetrics FT420 provides full indication of rate and total, plus 4-20 mA output. The AO55 provides blind 4-20 mA output. The FT520 is a batching flow processor, and the DL76 is a battery-powered data logger.
The adapter fitting of the EX sensor is standard male NPT, and can be directly threaded into ordinary saddles or threaded weld fittings. The EX115 and 215 include an isolation valve, allowing hot-tap installation, or installation and removal under pressure; a bronze ball valve is standard, with a 316 stainless steel valve option if needed.
Reverse flow output and immersibility are optional.
EX115/215: HOT-TAP ADJUSTABLE DEPTH INSERTION MAGMETER |
||
| EX115B | Brass Unit/ Bronze Ball Valve, 3" to 10" | $1,448.56 |
| EX115S | 316 SS Unit/Bronze Ball Valve, 3" to 10" | $1,642.13 |
| EX215B | Brass Unit/ Bronze Ball Valve, 10" to 48" | $1,687.13 |
| EX215S | 316 SS Unit/Bronze Ball Valve, 10" to 48" | $1,886.63 |
| OPTIONS | ||
| -08 | Stainless Valve Assembly | $643.63 |
| -09 | No Valve Assembly (deduct price) | -$57.00 |
| -15 | Reverse Flow Output | $160.31 |
| -40 | Immersible (consult factory for suitable applications) | $162.69 |
| -50 | Low Power Option | $0.00 |
| -72 | 12” Extension for 200-Series | $325.38 |
Shipping
Promag Enviro includes free shipping on accessories throughout Canada, including Vancouver, British Columbia(BC), Edmonton & Calgary, Alberta(AB), Regina, Saskatchewan(SK), Winnipeg, Manitoba(MB), Ottawa & Toronto, Ontario(ON), Quebec & Montreal, Quebec(QC), St. Johns, Newfoundland(NL), Charlottetown, Prince Edward Island(PE), Halifax, Nova Scotia(NS), Fredricton, New Brunswick(NB), Whitehorse, Yukon(YT), & Yellowknife, Northwest Territories(NT), Iqaluit, Nunavut(NU) and beyond.