Belt Press, Monobelt

Wastewater Treatment Canada
Belt Press

• Creates solids upto 30%
• Stainless steel
• Compact design
• Packaged and integrated solution
• Pre-thickening
• Economical solution

SPECS & PRICING: Contact Promag

For dewatering the sludge produced by average and big W.W.T.P., Promag proposes the MONOBELT®, a new generation of belt filter presses. The belt filter press is composed of two units, the pre-thickener and the sludge press. The pre-thickener performs the initial solid/liquid separation stage, taking sludge solids concentration from 0.5-3% up to 5-15 %. The dewatering in the press occurs first in the low pressure zone, then in the wedge zone and finally in the high pressure zone where the filter cake is compressed between the perforated cylinder cloth and the main cloth. The discharged sludge cake can reach a dry solids content from 18 to 30% depending on the influent sewage sludge. In conformity to the high quality standard of TEKNOFANGHI, all the standard machines are manufactured in 304 stainless steel.